CEL - 62X

The CEL-62x Series of Integrating Digital Sound Level meters can be used for the measurement of all workplace noise parameters to comply with workplace noise legislation, e.g. EU, OSHA and ACGIH. Use the CEL-62x Series to carry out occupational noise assessments or machinery noise tests as well as to assist with the selection of hearing protection. Choose a CEL-62x Series model to suit your requirements, either with a Class 1 or Class 2 Microphone for precision, and with or without Octave Band analysis, to aid you in the choice of hearing protection. The CEL-62x is a simple to use meter and data is displayed on the high resolution color display. Measurement screens are intuitively color coded according to the mode of operation, i.e. green if a measurement is being taken and red when a run has ended. Data is graphically displayed to give a clearer picture of the noise environment. Calibrate easily on-site with the 120 Series Calibrator to comply with best practice. The instrument also has six selectable setups – four that are pre-defined to legislative standards and two that can be customized so that you get the data you need. Regardless of the setup, the CEL-62x measures and stores ALL parameters, even if not selected and these can be viewed in the software. All runs are date and time stamped and the CEL-62x stores up to 100 runs. Simply connect your CEL-62x to a PC via the USB connection and the data can be easily reviewed without the need for proprietary software. The instrument has a single large measurement range of 20-140dB meaning that you don’t need to change range. On the CEL-620B, Octave band analysis is shown in real-time in both graphical and tabular format with the dominant frequency highlighted. Time history of the broadband noise level is displayed in real-time, so a user can see how the noise level varies with time.

• Noise at work applications

• Simple operation

• Rugged design

• Selection of hearing protection via the HML method

• Calculation of noise exposure

• Pre-defined and user configurations available

62x Datasheet - English

62x Datasheet - Chinese

Applicable Standards:

IEC 60651 - 1979 Octave filters (CEL-620B model only):

IEC 60804 - 2000 IEC 61260 Class 0

IEC 61672 - 2002 ANSI S1.11-2004

ANSI S1.4 - 1983 (R2006)

ANSI S1.43 - 1997 (R2007)

Technical:

Total measurement range: 20 to 140dB RMS (single range), 143.0 dB Peak

Frequency weightings RMS: Simultaneous A, C & Linear (Z)

Frequency weightings Peak: Simultaneous A, C & Linear (Z)

Time weightings: Simultaneous Slow, Fast & Impulse

Amplitude weightings: Q3, Q4 and Q5 (Q4 & Q5 applicable to Lavg only)

Thresholds: 70 to 90 (dB) in 1 dB steps (applicable to Lavg only)

Noise floor: <33dB(A) Class 2, <25dB(A) Class 1

Runs stored: 100

Display: 320x240 pixel transmissive color TFT

Frequency bands: 11 octave bands 16Hz to 16kHz (CEL-620B model only)

Calibration information: Stores pre and post run calibration date, time and level

Output (P.C.): USB 2.0 ‘A’ to ‘Mini B’

Batteries: 3 x AA Alkaline (supplied) or rechargeable

External power: 9-14V DC at 250mA via 2.1mm connector

Battery life: 11 hours with backlight on, 20 hours backlight off

Tripod mount: 1/4” Whitworth socket

Size mm (in): 72 x 229 x 31mm (2.8 x 9.0 x 1.2”)

Weight gm (Oz): 295g (10.4oz)